MTL Power Supplies

MTL ICC312

Repeater Power Supply: ICC312

Manufacturer: MTL Part Number: ICC312

Genuine surplus MTL ICC312 repeater power supply with dual isolated outputs, line-fault detection, and 20-35V dc operation for 2-wire transmitters.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Input signal 4 to 20mA
Number of output channels Two
Isolation 1500V dc/ac between input, output 1, output 2 and power supply
Power supply 20 to 35V dc
Load resistance 0 to 1kΩ
Transfer accuracy Better than 20μA for both outputs
Response time 80ms to 90% of span; 280ms to 99.9% of span
Ambient temperature limits -20°C to +55°C operating; -40°C to +80°C storage

Description

The MTL ICC312 repeater power supply is a DIN-rail isolator that energises a 2-wire 4-20mA transmitter and transfers its current to two separate isolated output circuits. Maintenance teams and integrators choose genuine surplus or refurbished ICC312 units to replace failed isolators without waiting on OEM lead times. Autronexa supplies verified surplus and refurbished MTL components with clear condition reports and practical sourcing support.

What This unit Does in a 4-20mA Loop

This unit sits between a field transmitter and the receiving system. It provides a fully isolated dc supply for the transmitter while repeating the 4-20mA signal to two independent outputs, each capable of driving loads up to 1kΩ. Three-port isolation separates input, outputs, and power supply at 1500V dc/ac. An open-collector line-fault detection output activates an alarm when the input cable breaks. The module mounts directly onto T- or G-section DIN-rail to DIN46277 and accepts 2.5mm conductors in a 40mm polyamide casing.

Figure 1: Front view of the MTL ICC312 Repeater Power Supply: ICC312 showing its physical design and enclosure.

Key Specifications That Matter on Site

This unit operates from a 20 to 35V dc power supply and delivers a minimum of 20V at 20mA to the transmitter. Transfer accuracy is better than 20μA for both outputs, with a temperature drift below 1μA/°C. Response time reaches 90% of span in 80ms and 99.9% in 280ms, so the loop reacts quickly to process changes. The line-fault detection transistor switches ON when input current exceeds 1mA and OFF below 0.2mA, with a maximum permitted voltage of 26V dc and maximum ON voltage of 1V. Ambient operating limits are -20°C to +55°C, with storage from -40°C to +80°C at 5 to 95% RH non-condensing.

Figure 2: Technical layout and connection details for the MTL ICC312 Repeater Power Supply: ICC312.

Why Genuine Surplus Makes Sense for This Module

When an unit fails, the priority is a verified replacement that matches the original wiring and isolation scheme. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus stock often shortens the wait compared with factory lead times, and This unit’s standard DIN-rail format means no re-engineering is needed. Autronexa focuses on genuine parts, verified, so you can trust the module you install.

Sourcing the Right unit for Your Panel

Before ordering, confirm the exact model and terminal configuration, especially whether your loop uses terminals 7&8 for a 2-wire transmitter or terminals 8&9 for a current source. Check that the power supply falls within 20 to 35V dc and that output loads stay at or below 1kΩ. Ask for the condition grade and any test documentation. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: ICC312-datasheet.pdf

Frequently asked questions

Is this a genuine MTL ICC312 or a clone?

Autronexa verifies each ICC312 against OEM datasheet markings and part-number cross-reference before listing. We supply genuine surplus and refurbished units, not copies.

What condition will the ICC312 arrive in?

Our default condition is refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are graded and described before shipment.

How fast can you ship the ICC312?

Lead time depends on current stock. Contact Autronexa for the latest availability and dispatch estimate for your required quantity.

Does the ICC312 work with my existing 4-20mA loop?

The ICC312 provides two isolated outputs from one 4-20mA transmitter, with 1500V dc/ac isolation and loads up to 1kΩ. Confirm your terminal wiring and power supply range with our team before ordering.

Related & compatible parts

MTL

ICC212

Genuine MTL ICC212 repeater power supply and isolating driver with three-port galvanic isolation, verified for smart transmitter loops.

In Stock

MTL

MTL3081

Genuine surplus MTL3081 thermocouple isolator with ±50mV input, non-energy-storing terminals, and optional burnout safety drive. Verified and ready…

In Stock

MTL

MTL3013

Genuine surplus MTL3013 two-channel switch/proximity detector relay for hazardous-area sensors, verified and ready to ship from Autronexa.

In Stock

MTL

MTL4521L

Genuine surplus MTL4521L loop-powered solenoid/alarm driver for Zone 0 IIC hazardous areas, verified and ready to ship from…

In Stock

News & guides for MTL

View all articles

Request a quote for this part

Part number: ICC312

We reply within one business day.

ICC312 Quote reply within 1 business day