MTL Circuit Protection

MTL SD32

Circuit Protection

Manufacturer: MTL Part Number: SD32

Genuine MTL SD32 surge protector with 32 VDC / 22 VAC rating, 250 mA nominal current, and fuse disconnect. Verified surplus and refurbished units from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Nominal voltage (Un) 32 VDC, 22 VAC
Nominal current (In) 250 mA
Series resistance 4.2 per line
Max. leakage current 5 µA
Rated voltage (MCOV) 36
Voltage protection level @1kV/µs <45 V
Residual voltage @ In 60 V
Bandwidth 25 kHz
Special feature Fuse disconnect
Dimensions (LxWxH) 0.7 cm x 9.9 cm x 10.13 cm

Description

A field instrument on a 32 VDC signal line takes a transient hit, and the downstream electronics are at risk. The MTL SD32 surge protector is built to sit on that line and divert the surge before it reaches sensitive equipment. Autronexa supplies genuine surplus and refurbished this unit units with verified condition and practical sourcing support.

What the MTL this unit Surge Protector Does

this unit is a surge protector from MTL instruments, rated for 32 VDC and 22 VAC nominal voltage. It carries a nominal current of 250 mA and presents a series resistance of 4.2 per line. The maximum leakage current is 5 µA, so it stays effectively transparent to the signal under normal conditions. A fuse disconnect feature is built in, which lets technicians isolate the protected circuit during maintenance without pulling the module. The compact housing measures 0.7 cm x 9.9 cm x 10.13 cm and weighs 0.07 kg, so it fits into tight panel spaces where a full-size protector will not go.

Figure 1: Front view of the MTL SD32 industrial automation component showing its physical design and enclosure.

Protection Performance Buyers Should Verify

Protection level is the number that matters when specifying a surge protector. This unit has a voltage protection level of less than 45 V at 1 kV/µs, and a residual voltage of 60 V at nominal current. The rated voltage, or MCOV, is 36. These figures describe how much let-through voltage the downstream device will see during a surge event. The 25 kHz bandwidth shows the protector is intended for signal lines rather than high-frequency data buses. Buyers should match these values against the withstand rating of the equipment being protected before ordering.

Why Genuine Surplus Makes Sense for This Model

MTL surge protectors are often specified into long-life process installations, and when one fails, the priority is a correct replacement rather than a new-production unit. Autronexa stocks genuine surplus and refurbished this unit protectors that are tested against OEM datasheet specifications and functionally verified before dispatch. That gives maintenance teams a practical alternative to waiting on factory lead times. Because this unit is a compact DIN-rail style module, keeping a verified spare on the shelf is a realistic maintenance strategy. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the MTL SD32 a genuine MTL unit or a clone?

Autronexa verifies every MTL SD32 against OEM datasheet markings and part-number cross-reference before it enters stock. Units are genuine surplus or professionally refurbished, not grey-market copies.

What condition will the SD32 surge protector arrive in?

The MTL SD32 is supplied as refurbished unless otherwise stated. Each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch.

How fast can Autronexa ship the SD32?

Lead time depends on current stock at the time of order. Contact Autronexa with your SD32 requirement for verified condition and current availability.

What are the SD32 voltage and current ratings?

The MTL SD32 is rated for 32 VDC and 22 VAC nominal voltage with a nominal current of 250 mA. Its rated voltage (MCOV) is 36, and the voltage protection level is less than 45 V at 1 kV/µs.

Does the SD32 include a fuse disconnect feature?

Yes. The MTL SD32 includes a fuse disconnect feature, which allows the protected circuit to be isolated during maintenance without removing the module from its mounting.

Related & compatible parts

MTL

MTL5041

Genuine surplus MTL5041 isolator: fully-floating 2-wire transmitter supply with 4 to 20mA repeat for safe-area loads. Verified condition,…

In Stock

MTL

SD07R

Genuine MTL SD07R surge protector with 50MHz bandwidth. Verified surplus stock, tested and ready for your signal line…

In Stock

MTL

MTL4016

Genuine surplus MTL4016 interface: two channels, relay outputs, line fault detection, and hazardous-area certification for Zone 0/Div.1.

In Stock

MTL

SD16R

Genuine MTL SD16R surge protection device with 50MHz bandwidth and <1ns response time. Verified surplus and refurbished units…

In Stock

News & guides for MTL

View all articles

Request a quote for this part

Part number: SD32

We reply within one business day.

SD32 Quote reply within 1 business day