MTL Circuit Protection

MTL SD16

Circuit Protection

Manufacturer: MTL Part Number: SD16

Genuine MTL SD16 surge protection module with fuse disconnect, rated 16 Vdc and 250 mA — verified surplus stock ready for your signal loop.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Nominal voltage (Un) 16 Vdc / 11 Vac
Nominal current (In) 250 mA
Series resistance 4.2 ohms per line
Max. leakage current 5 µA
Rated voltage (MCOV) 17 V
Voltage protection level (Up) @1kV/µs <25 V
Residual voltage @isn 40 V
Bandwidth 25 kHz
Special feature Fuse disconnect

Description

Industrial signal loops have grown denser and more sensitive with every control-system generation, so a single unprotected pair can now take down more than it once could. The MTL SD16 is a surge protection module built for low-voltage signal circuits, rated at a nominal 16 Vdc and 250 mA, with a fuse disconnect feature that lets technicians isolate a loop without pulling wiring. Maintenance teams and panel builders reach for this model when they need a compact protective barrier that matches the circuit rather than a generic device. Autronexa supplies it as a genuine surplus unit, verified against OEM markings before dispatch.

What the MTL this unit Does in a Signal Circuit

The module sits in series with a signal line and limits what reaches the downstream electronics. Its nominal voltage is 16 Vdc, and the same line lists 11 Vac as an alternating rating, so it suits circuits that carry a low-level DC signal. Nominal current is 250 mA, which covers typical instrumentation loops. Series resistance is given as 4.2 ohms per line, and the maximum leakage current is 5 µA, keeping the protective element from disturbing the measured signal. The voltage protection level is under 25 V at 1 kV/µs, and residual voltage at rated current is 40 V. Bandwidth extends to 25 kHz, so the module passes the signal frequencies these loops normally carry. The fuse disconnect feature is the practical detail many buyers ask about first: it gives a clear isolation point during maintenance.

Figure 1: Front view of the MTL SD16 industrial automation component showing its physical design and enclosure.

Why Genuine Surplus Suits This Protection Module

Surge protectors are often treated as consumables, yet the MTL this unit is a specified component with defined electrical values. A refurbished or surplus unit from Autronexa is checked against the OEM datasheet values above and functionally verified before it ships. That matters when a panel is being restored and the original model must be matched rather than substituted. Because these modules are frequently pulled from decommissioned systems, surplus supply can shorten the wait compared with ordering through standard channels. Autronexa keeps genuine parts, verified, in its surplus and refurbished inventory, and the sourcing team can confirm condition and current availability for your exact requirement.

Figure 2: Technical layout and connection details for the MTL SD16 industrial automation component.

Sourcing Checks Before You Order an this unit

Buyers should confirm the circuit voltage and current against the 16 Vdc and 250 mA ratings, and check that the 4.2 ohms per line series resistance fits the loop budget. The 25 kHz bandwidth should also be compared with the signal frequency in use. Ask for the fuse disconnect variant specifically, since that feature defines this model. Condition should be stated clearly: surplus units are removed from service, while refurbished units are tested. Autronexa can provide verified condition details and current lead time on request. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is the MTL SD16 a genuine module or a copy?

Autronexa verifies each MTL SD16 against OEM datasheet markings and part-number cross-reference before it enters stock. Units are supplied as genuine surplus or refurbished, not as grey-market clones.

What condition will the SD16 arrive in?

The MTL SD16 is supplied as a refurbished or surplus unit, tested against the OEM datasheet values and functionally verified by the Autronexa sourcing team. Condition details are confirmed at the time of your request.

How fast can Autronexa ship the SD16?

Lead time for the MTL SD16 depends on current stock. Contact Autronexa with your part number for verified condition and current availability before placing an order.

What are the SD16 electrical ratings?

The MTL SD16 is rated at a nominal 16 Vdc and 250 mA, with series resistance of 4.2 ohms per line and maximum leakage current of 5 µA. Its voltage protection level is under 25 V at 1 kV/µs, and bandwidth extends to 25 kHz.

Related & compatible parts

MTL

MTL3021

Genuine surplus MTL3021 switch/voltage change module for hazardous-area control, verified condition and practical sourcing support from Autronexa.

In Stock

MTL

MTL5541

Genuine surplus MTL5541 repeater power supply for 4-20mA transmitters in hazardous areas, with HART support and SIL2 capability.…

In Stock

MTL

MTL4015

Genuine surplus MTL4015 switch/proximity detector for hazardous areas, with dual relay outputs and verified condition from Autronexa.

In Stock

MTL

MTL3052

Genuine surplus MTL3052 protection module for MTL800 multiplexer data highways, verified condition and ready to ship from Autronexa.

In Stock

News & guides for MTL

View all articles

Request a quote for this part

Part number: SD16

We reply within one business day.

SD16 Quote reply within 1 business day