MTL Servo Drives & Motors

MTL IOP32

Drive solenoids

Manufacturer: MTL Part Number: IOP32

Genuine MTL IOP32 surge protector for single-loop solenoid drive circuits, verified surplus and refurbished with clear lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Maximum surge current 20kA (8/20µs waveform) per line
Leakage current <1µA @ working voltage
Loop resistance 4 ohm
Maximum rated load current 0.675A
Response time <1ns
Ambient temperature -40°C to +80°C
Terminals 2.5mm2 (12 AWG)
Mounting T-section DIN-rail (35 x 15mm rail)

Description

The MTL IOP32 is a single-loop surge protection module for digital and analogue I/O, built to shield solenoid, relay and actuator drive circuits from damaging transients. For maintenance teams, a genuine surplus or refurbished IOP32 keeps that protection in place without waiting on OEM lead times. It carries a 20kA hybrid protection circuit and a 4 ohm loop resistance, so it adds only a tiny voltage drop to the circuit it guards.

Why This unit Suits Solenoid Drive Circuits

Solenoid and relay coils are frequent victims of switching transients, and This unit is designed for exactly that duty. Its hybrid circuit combines 20kA gas discharge tubes with solid-state components, reacting in under 1ns to redirect surges between lines or to ground. Because it resets automatically, there is no manual reset step after a surge event. The 4 ohm loop resistance keeps the inserted voltage drop small, which matters when coil pull-in margins are already tight. Removable terminals allow a loop disconnect by simply unplugging from the side of the module, so a maintenance engineer can isolate a circuit for testing without disturbing field wiring.

Figure 1: Front view of the MTL IOP32 Drive solenoids showing its physical design and enclosure.

Practical Specs for Maintenance Planning

Three figures drive most service decisions on this module. The maximum surge current of 20kA per line (8/20µs waveform) defines the transient energy it can divert. Leakage current below 1µA at working voltage means the module does not disturb the loop in normal operation. The operating range of -40°C to +80°C covers most plant environments, while 5 to 95% RH non-condensing suits typical control cabinets. The 12mm width per loop keeps DIN-rail space predictable, and the plug/header screw terminal strip accepts 2.5mm2 (12 AWG) conductors. Mounting is on T-section DIN rail (35 x 15mm), clamped in one manual operation that also provides the ground connection.

Sourcing a Verified unit

Autronexa supplies genuine surplus and refurbished MTL IOP modules, each checked against OEM datasheet markings and part-number cross-reference before dispatch. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Confirm the exact model and revision match for your panel, and state whether you need single-channel integrity or a multi-loop variant. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: IOP32-datasheet.pdf

Frequently asked questions

Is this a genuine MTL IOP32, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it is listed. We supply genuine surplus and refurbished MTL modules, not copies.

What condition will the IOP32 arrive in?

Units are supplied refurbished as standard, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a specific condition grade.

How fast can you ship the IOP32?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability before ordering.

Does the IOP32 suit solenoid drive circuits?

Yes. The IOP32 provides surge protection for one loop or two wires, with a 4 ohm loop resistance and a maximum rated load current of 0.675A, which suits solenoid, relay and actuator drive circuits.

Related & compatible parts

MTL

SD32T3

Genuine MTL SD32T3 surge protection device with 3-terminal configuration and 10-year warranty. Verified surplus and refurbished units from…

In Stock

MTL

MTL4015

Genuine surplus MTL4015 switch/proximity detector for hazardous areas, with dual relay outputs and verified condition from Autronexa.

In Stock

MTL

MTL4521L

Genuine surplus MTL4521L loop-powered solenoid/alarm driver for Zone 0 IIC hazardous areas, verified and ready to ship from…

In Stock

MTL

MTL3021

Genuine surplus MTL3021 switch/voltage change module for hazardous-area control, verified condition and practical sourcing support from Autronexa.

In Stock

News & guides for MTL

View all articles

Request a quote for this part

Part number: IOP32

We reply within one business day.

IOP32 Quote reply within 1 business day