MTL I/O & Function Modules

MTL MTL3011

Switch located

Manufacturer: MTL Part Number: MTL3011

Genuine surplus MTL3011 switch input isolator with relay output, line-fault detection and phase-reverse control. Verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Number of channels One, fully floating
Voltage applied to sensor 7.7 to 9.0V dc from 1kΩ
Output closed If >2.1mA (<2kΩ) in sensor circuit
Output open If <1.2mA (>10kΩ) in sensor circuit
Hysteresis 200µA (650Ω) nominal
Response time 1ms typical
Contact rating 200V, 0.5A, 10VA (ac); 200V, 0.5A, 10W (dc)
Contact life expectancy 0.75 x 106 operations at max. load
Power requirement 25mA typical at 24V
Weight 140g

Description

The MTL3011 is an MTL switch input isolator that lets a safe-area load be controlled by a proximity detector or switch located in a hazardous area, and it provides a relay output for general use. For maintenance and procurement teams, a genuine surplus unit keeps a hazardous-area loop running without waiting on a full OEM lead time.

What the MTL3011 Does in a Hazardous-Area Loop

This unit carries one fully floating channel and places the switch in Zone 0, IIC, T6 hazardous areas and Div 1, Group A locations. It applies 7.7 to 9.0V dc to the sensor from 1kΩ, so the detector sees a stable supply across the loop. The output closes above 2.1mA in the sensor circuit and opens below 1.2mA, with 200µA (650Ω) nominal hysteresis that keeps chatter out of the relay. Because the channel is fully floating, one unit covers a range of loop layouts, which reduces the number of variants a maintenance store must hold.

Figure 1: Front view of the MTL MTL3011 Switch located showing its physical design and enclosure.

Relay Output, Line-Fault Detection and Phase Reverse

This unit relay output is rated 200V, 0.5A, 10VA (ac) and 200V, 0.5A, 10W (dc), with 60V individual maxima for USA resistive loads. Response time is 1ms typical, so the relay follows the process without adding measurable delay. Built-in line-fault detection opens the output on a broken line below 100µA or a shorted line above 6.5mA, which turns a hidden cable fault into a clear alarm state. A switch on top of the unit reverses operation, so either sensor state can signal an alarm without rewiring. Contact life expectancy is 0.75 x 106 operations at maximum load; reactive loads must be adequately suppressed to protect the light-duty contacts.

Figure 2: Technical layout and connection details for the MTL MTL3011 Switch located.

Surplus Advantage for This Model

A genuine surplus or refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch. That matters on a shunt-diode safety barrier, where an unverified substitute can compromise the loop. Each unit is checked for relay operation, line-fault behaviour and phase-reverse function, and the replaceable 50mA fuse is confirmed present. For plants holding spares of this family, a verified surplus unit is a practical way to restore a loop while avoiding the cost and delay of a new-build order.

Sourcing the Right Variant

Confirm the channel count, output type and hazardous-area certification against your loop drawing before ordering. This unit draws 25mA typical at 24V and weighs 140g, so it fits existing panel space. Please verify current lifecycle status and availability with Autronexa before ordering.

📄 Download Datasheet: MTL3011-datasheet.pdf

Frequently asked questions

Is this a genuine MTL MTL3011, or a clone?

Every MTL3011 we supply is checked against OEM datasheet markings and part-number cross-reference before it is listed. We do not sell copies or unverified substitutes.

What condition will the MTL3011 arrive in?

Units are supplied refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us for the current condition grade on the unit in stock.

How fast can you ship the MTL3011?

Contact Autronexa for current lead time. Surplus and refurbished stock is ready to ship once condition is confirmed against your order.

Does the MTL3011 relay output suit my load?

The relay contacts are rated 200V, 0.5A, 10VA (ac) and 200V, 0.5A, 10W (dc), with 60V individual maxima for USA resistive loads. Reactive loads must be adequately suppressed to protect the light-duty contacts.

Related & compatible parts

MTL

MTL3045

Genuine surplus MTL3045 isolator passes 0-20mA to hazardous-area I/P converters and actuators with 800Ω load capability and verified…

In Stock

MTL

MTL4016

Genuine surplus MTL4016 interface: two channels, relay outputs, line fault detection, and hazardous-area certification for Zone 0/Div.1.

In Stock

MTL

MTL3081

Genuine surplus MTL3081 thermocouple isolator with ±50mV input, non-energy-storing terminals, and optional burnout safety drive. Verified and ready…

In Stock

MTL

SLP16D

Genuine surplus MTL SLP16D modules provide hybrid surge protection for two process loops, with 20kA surge current and…

In Stock

News & guides for MTL

View all articles

Request a quote for this part

Part number: MTL3011

We reply within one business day.

MTL3011 Quote reply within 1 business day