MTL MTL4014
Switch located
Genuine surplus MTL4014 switch input relay for hazardous-area circuits, with line fault detection and 2ms response. Verified condition from Autronexa.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Number of channels | One |
|---|---|
| Location of switch | Zone 0, IIC, T6 hazardous area; Div.1, Group A |
| Voltage applied to sensor | 7.0V – 9.0V dc from 1kΩ nominal |
| Output thresholds | Closed if input >2.1mA (<2kΩ); open if input <1.2mA (>10kΩ) |
| Response time | 2ms maximum |
| Contact rating | 10W, 0.5A, 35V (dc) |
| Isolation | 250V ac between safe and hazardous area circuits |
| Power requirement | 45mA at 24V dc; 50mA at 20V dc; 36mA at 35V dc |
Description
When a switch in a Zone 0 hazardous area must control a safe-area load, the barrier between those circuits decides whether the signal arrives cleanly. The MTL4014 solves that problem with a single-channel relay that also reports line faults through a separate relay. Autronexa supplies this unit as genuine surplus, verified before dispatch.
What the MTL4014 Does in a Hazardous-Area Circuit
This unit enables a safe-area load to be controlled by a proximity detector or switch located in a hazardous area through a reed relay. Its switch location covers Zone 0, IIC, T6 and Div.1, Group A. The unit applies 7.0V – 9.0V dc to the sensor from a 1kΩ nominal source. Output closes when input exceeds 2.1mA (10kΩ). Hysteresis is 200µA (650Ω) nominal. Line fault detection cannot be disabled, so broken or shorted lines are always reported.

Technical Specs That Matter on Site
The relay output is single-pole on/off and open when de-energised, with a 2ms maximum response time. Contact rating is 10W, 0.5A, 35V (dc), and contact life expectancy is 107 operations at maximum load. Reactive loads must be adequately suppressed. Isolation is 250V ac between safe and hazardous area circuits. Power requirement is 45mA at 24V dc, 50mA at 20V dc and 36mA at 35V dc. Three LEDs show input, line fault and power status.

Why Genuine Surplus Fits This Model
This unit carries a specific safety description of 10.5V, 800Ω, 14mA, so a clone or mislabelled unit is not a practical substitute. Autronexa sources genuine surplus and refurbished units, checks markings and part numbers against the datasheet, and confirms condition before shipping. For maintenance teams, that means a verified replacement without waiting on a full OEM lead time. Contact Autronexa with your part number for verified condition and current availability.
Frequently asked questions
Is this a genuine MTL MTL4014, or a clone?
Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it is listed. The MTL4014 safety description of 10.5V, 800Ω, 14mA is part of that check.
What condition will the MTL4014 arrive in?
Units are supplied as genuine surplus or refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the current condition grading of available stock.
How fast can you ship the MTL4014?
Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability.
Does the MTL4014 work with both proximity detectors and switches?
Yes. The line fault detection function works with both, provided switch-type sensors are fitted with suitable resistors as shown in the circuit diagram. LFD cannot be disabled.
Related & compatible parts
MTL
MTL5541
Genuine surplus MTL5541 repeater power supply for 4-20mA transmitters in hazardous areas, with HART support and SIL2 capability.…
MTL
SD32X
Genuine MTL SD32X surge protection device with 32Vdc nominal voltage and 400 mA nominal current. Verified surplus stock…
MTL
MTL4706
Genuine surplus MTL4706 barrier for 2-wire transmitters: ±2µA accuracy, 4/20mA output, verified condition and clear lead times from…
MTL
MTL3041
Genuine surplus MTL3041 transmitter isolator with fully floating 17.5V loop supply and 4 to 20mA signal range, verified…
News & guides for MTL
Nexans 700 VDC Microgrid: What Changes for Factories and Spares
Nexans has switched part of its own AmpaCity global innovation hub in Lyon, France, onto a 700 V direct-current main distribution…
Orbit 60 PPM (142M8515): What the Module Does and What the 90% Load Warning Means
TL;DR: The Bently Nevada Orbit 60 Protection Processing Module (PPM) is the centralized compute engine of the protection system: it…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
Motion Control Precision: Servo Loops, Fieldbus Jitter, AI
Motion control precision depends on servo loop rates, fieldbus cycle times and jitter, sensor latency and mechanics. AI sits above…
Schneider Electric Product Carbon Footprint Data: What Engineers Can Look Up
TL;DR: Schneider Electric publishes product-level carbon data, but not through a single system. Product pages carry a “total life cycle…
Bently Nevada 3500/06 Weatherproof Housing: Ratings, Purging and Mounting Limits
TL;DR: The weatherproof enclosure for a Bently Nevada 3500 rack is the 3500/06, not the 3500/01 — 3500/01 is the…
Siemens Kärnten Netz Grid Software Contract: Scope and Limits
TL;DR: On 9 November 2026 Siemens announced a six-year software contract with Kärnten Netz GmbH (KNG), the Carinthian distribution system…
